More Water Math Problems & Charts

What is the Langlier Index if the pHA is 9.2 and the pHS is 8.6?  Is this stable, depositing or corrosive?

If the P alkalinity is 0 mg/L and the T alkalinity is 100 mg/L, calculate the following:

  • Bicarbonate alkalinity
  • Carbonate alkalinity
  • Hydroxide alkalinity

If the P alkalinity is 35 mg/L and the T alkalinity is 60 mg/L, calculate the following:

  • Bicarbonate alkalinity
  • Carbonate alkalinity
  • Hydroxide alkalinity

120 mg/L of Ca as Ca is equivalent to ______ mg/L of Ca as CaCO3

If you are removing 300 mg/L of hardness and your flow is 2 mgd, how many pounds of hardness are you removing?

You are adding 6 lbs/day of chlorine gas to a flow of 277 gpm and your total chlorine residual is 1.5 mg/L. What is your chlorine demand in mg/L?

Click on the thumbnail below for a chart of pump station math for cylindrical tanks and have some fun!!!

Click on the thumbnail below for a chart of pump station math for rectangular tanks and have some fun!!!

Click on the thumbnail below for a chart of pipe math and have some fun!!!

Match
1The units for pressure areADivided by
2Head is expressed inB2.31
3Velocity is measured inC0.434 psi
4Units of flowDpsi
5Pressure times _______ = HeadEfps
6Head __________ 2.31 = PressureF1440
720 psi = G694 gpm
81 MGD = Hcfs
9A head loss of 7 feet =I3 psi
 JTimes
 Kft
 L46.2 ft
 MSubtracted by

The formula for the volume of a rectangular tank is

A.  (Length)(Width)

B.  (0.785)(Diameter2)

C.  (Length)(Width)(Height)

D.  (0.785)(Diameter2)(Height)

The formula for the volume of a cylindrical tank is

A.  (Length)(Width)

B.  (0.785)(Diameter2)

C.  (Length)(Width)(Height)

D.  (0.785)(Diameter2)(Height)

Given a tank measures 50 feet long, 25 feet wide, and 15 ft deep, calculate:

  • Surface area in ft2
  • Cross-sectional area in square feet
  • Volume in cf
  • Capacity in gallons

Leave a comment

Your email address will not be published. Required fields are marked *